Post new topic Reply to topic | Message |
|
||||
Hello everyone !
I'm trying to get my PC-DC server working, I have the feeling that I'm close, I just need a little help in the end. So I have a PAL DC with a 670-14116A modem attached to it. I'm using a wmware machine with ubuntu 14.04 running inside. The modem in the computer is an internal conexant softmodem. I built a voltage inducer using a 12Volt power adapter. I followed this guide for setting up all this : http://www.dreamcast-scene.com/guides/pc-dc-server-guide-win7/ So basically, I'm stuck at the dialing part. The same happens in PSO or dreamkey 3.0. Each time, when it's dialing, the output of /var/log/mgetty/mg.ttyS1.log goes all the way through here : 04/23 02:12:38 yS1 mgetty: interim release 1.1.36-Jun15
04/23 02:12:38 yS1 WARNING: parent process not init(pid=1), but pid=3486 (sudo /sbin/mgetty -s 115200 -D /dev/ttyS1 -m "" ATM0) 04/23 02:12:38 yS1 check for lockfiles 04/23 02:12:38 yS1 locking the line 04/23 02:12:38 yS1 lowering DTR to reset Modem 04/23 02:12:39 yS1 send: ATM0[0d] 04/23 02:12:39 yS1 waiting... 04/23 02:12:48 yS1 wfr: waiting for ``RING'' 04/23 02:12:48 yS1 send: ATA[0d] 04/23 02:12:48 yS1 waiting for ``CONNECT'' Then, I get (on dreamkey or PSO) a "The line is busy. Please wait a moment. Do you wish to redial ?" error. If I say yes, it outputs me : -- 04/23 02:17:37 yS1 mgetty: interim release 1.1.36-Jun15 04/23 02:17:37 yS1 WARNING: parent process not init(pid=1), but pid=3566 (sudo /sbin/mgetty -s 115200 -D /dev/ttyS1 -m "" ATM0) 04/23 02:17:37 yS1 check for lockfiles 04/23 02:17:37 yS1 locking the line 04/23 02:17:38 yS1 lowering DTR to reset Modem 04/23 02:17:38 yS1 send: ATM0[0d] 04/23 02:17:39 yS1 waiting... 04/23 02:17:43 yS1 wfr: waiting for ``RING'' 04/23 02:17:43 yS1 send: ATA[0d] 04/23 02:17:43 yS1 waiting for ``CONNECT'' ** found ** 04/23 02:18:00 yS1 send: 04/23 02:18:00 yS1 waiting for ``_'' ** found ** 04/23 02:18:12 ##### failed dev=ttyS1, pid=3567, got signal 1, exiting And the I get the "line is busy" error again. It just finds the CONNECT, then wait for the ``_" and finds it, and the it crashes To get this, each time I have to dial twice. Dialing a third time is useless because mgetty stopped. So basically, pppd is never launched, and I can't find a way to get past this error. If you need me to provide more information, that's no problem ! Thanks a lot in advance |
||||
|
||||
Have you made sure that you have blind dialing enabled? It's an option in planetweb and you have to enter an AT command in dreamkey (atx=0 I believe). | ||||
_________________ PSO: Erisi HUnewearl Eda FOmarl Official Servers: (formerly) Nawara'ven |
||||
|
||||
Yeap, I've set ATX=0 into AT commands in dreamkey. But I get the same result as described above.
Thanks a lot for your answer ! |
||||
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum