Dreamcast Online at OnlineConsoles.com

I figured here might be one of the better chances to find one of these

I'm looking to buy a Dreamcast coders cable. Offering $50 USD for one. If I cannot find one in the next week or two, I'll prob ...

What I meant by mentioning the modem was prior to DreamPi it was more common to play with someone using BBA than modem at least in my experience

So you're saying if my WAN IP of router is 1.2.3.4, ...

I'm on phone so I cannot quote properly, maybe you can edit this reply

"- Network addresses may be either names or IP addresses"

Pretty much finding the proper IP of the Dreamcast or c ...

I've tried to connect to this via bba a few months ago. But I could not figure out the proper configuration. Would it be a hassle to update the guide for connecting?

There were settings of assignin ...

I've tried making a pc-dc server before with revision-a modem and still needed voltage. It varies really, maybe you'll need voltage maybe not. The problem is with PCI modems is most of them don't virt ...

One thing to note though is usually the cheap phone cables included with conexant modems typically only have two wires in them. Look for phone cables with 4 wires inside of them. The cheaper cables ca ...

From what i've heard/read, the modems that run voltage down the line have external power supplies. It's not likely a USB powered modem will do so. Standard phone jacks run up to 150v of electricity do ...

Alternatively to the 9v battery you can use a 9v A/C adapter. You just need to figure out the positive an negative ends. Otherwise its the same

No second monitor needed, you just load the image onto the SD card and boot up the pi as far as I understand. The benefits of the pi are not needing to boot up the virtual machine, no configuring, and ...

http://www.onlineconsoles.com/content_images/dc/voltinducc.jpg

I haven't made an LVI, but I essentially did making this image. If it's wrong, someone correct me. It's a lot easier than it seems

http://s17.postimg.org/fmvioydjj/voltage_inducer.jpg

This automates the whole thing. The hardest part is making the voltage inducer. Which looks harder than it is. You just connect a capacitor, resistor, and 9v battery clip in a specific order to one wi ...

That's some cool news

With kazade's new Raspberry Pi dial-in server software, modem only may be just fine

I've been looking into this for a while now over at assembler games, http://assemblergames.com/l/threads/half-life-has-some-functional-multiplayer-components.57318/

Its really long, look at it as a ...